Classe SSP-75 Preamplifier/Surround Sound Processor.
w: 18.5 x d: 16.25 x h: 7.25"
With Classé's remarkable SSP-75 preamplifier/ surround sound processor, the true re-creation of a live performance is only the beginning.
Indeed, the SSP-75 provides truly stunning reproduction of your favorite music with an two-channel signal path optimally balanced to provide both exceptional performance and long-term reliability. Left and Right Front balanced (XLR) inputs and outputs are standard. In fact, all six output channels (5.1) are balanced, erasing the problems with ground loops.
The new world of multi-channel sound will delight you. The design of the SSP-75 takes you into the future and delivers the most up-to-date digital processing available. Classé's design mandates have always included unusual degrees of flexibility, meticulous construction and simple, intuitive operation.
Even the front panel, classic Classé in its simplicity and elegance, invites the most casual user to enjoy all the benefits today's home entertainment systems can provide. The informative display provides instant feedback and status checks for all important operations.
The SSP-75 rewards the more sophisticated and demanding user with a carefully integrated résumé of capabilities, including Dolby Digital, DTS, and Dolby Pro Logic surround processing. Sharing the same design philosophy and critical digital converters already proven in Classé's newest extraordinary two channel digital music components, the SSP-75 redefines transparency and nuance for the most critical of music listening. At the same time the SSP-75 raises performance levels for all home theater systems.
The SSP-75 provides analog and digital inputs for up to 20 source components (6 audio-only (one pair balanced), 6 single-ended audio-video, 7 digital audio-video and 1 AC3 (LD) adapter), each with custom input ID capability. The SSP-75 supports three video formats: Component, S-Video and composite.
| Frequency Response: |
+0.1, - 0.6 db DC to 20 KHz typical |
| Sensitivity: |
10mV minimum. analog input level |
| Maximum Output Voltage (Main): |
4.95V RMS single ended, 9.9V RMS |
|
balanced |
| Gain: |
10 db analog inputs all modes |
|
except stereo. |
|
+3.9 db maximum stereo |
| Input Impedance (line level audio): |
10K ohms nominal |
| S/N Ratio (audio): |
-102 dbr typical |
| Input Impedance (video): |
75 Ohms typical |
| S/N Ratio (video): |
-65 db minimum |
| Output Impedance (line level audio): |
75 Ohms single ended |
|
150 Ohms balanced typical |
| THD + N: |
-80 dbr @ full scale output, |
|
-100 dbr @ -60 dbr output typical |
| Output Impedance (video): |
75 Ohms typical |
| Programming Memories |
every input |
| Source Paths |
3 separate, simultaneous paths for |
|
audio and video |
| INPUTS: |
|
| Audio inputs: |
20 (automatically detect "live" input) |
|
7 (4 Coax , 2 TOSlink, 1 AES/EBU) |
| Digital. |
12 pair (11 pair Single Ended , |
| Analog |
1 pair Balanced) |
|
1 set analog 5.1 inputs (6 RCA) |
| Video inputs: |
8 total, made up of any combination |
|
of the following |
| Component |
2 |
| S-Video |
6 (AV 1 - 6) automatically |
|
detects "live" input |
| Composite |
6 (AV 1 - 6) automatically |
|
detects "live" input |
| OUTPUTS: |
|
| Digital outputs: |
|
| Straight through from digital input |
2 (1 coaxial, 1 TOSlink) |
| Audio outputs: |
|
| Main Audio |
Left and Right Front: (For two |
|
channel music and surround): |
| All analog main room outputs are both |
Center Front, |
| single-ended (RCA) and balanced (XLR) |
Left and Right Surround, |
|
LFE/Subwoofer, |
| Remote room Audio (with remote control) |
1 pair, single ended |
| Record out Audio (line level only) |
2 pair, single ended |
| Video outputs: |
|
| Main |
1 - Component, 2 - S-Video, 2 - Composite, |
| Remote |
1 - Composite |
| Record |
1 - S-Video, 1 composite |
| FEATURES: |
|
| Automatic Speaker Calibration |
Microphone and cable supplied. |
| (includes both speaker level |
|
| and delay configuration) |
|
| HDTV ready |
Component video |
| NTSC and PAL |
switchable in setup |
| 12 Volt DC out |
2 Separate Main room and Remote outputs |
| RS-232 control |
|
| Power Consumption: |
50 watts typical operation |
| Dimensions: |
w: 18.5 x d: 16.25 x h: 7.25" |
| Weight (lb./kg) |
32lbs 40lbs shipping |
| Standard Finishes: |
Satin Black with Soft Shadow Silver |
        
|
