A rotary owner's dream comes true: 20B Cosmo motor with single turbo! You might ask why we are selling it for such a good price. The car is not complete yet. It still needs a stand alone computer, ignition, a clutch, and a midpipe and some wiring to get the car up and running. All the hard work has been done on the car such as custom fabrication on the subframe, single turbo kit, piping, fuel system, cooling system, etc. There is ZERO miles on the parts on the car since it's not running yet. The set up on the car is good for 600+ rwhp on low boost and 750+ rwhp on high boost. This car was purchased from a customer of Acosta Racing which is the most well known 20B builder in the country. Acosta Racing asks $60,000 for their 20B swap. This is once a life time chance for you to get a almost complete 20B project 3rd Gen RX-7 for almost half the price. The car only has spares on it so you don't have to pay for the rims you might not like and get the ones you like. There are dents on both doors so bodywork is required. A good thing about getting this car is that since it's not totally complete yet, you can pace yourself with your budget and complete it over time without spending about $50,000-$55000 on a 20B 3rd Gen RX-7.
Performance Price
20B Motor Core $4500
Street Ported Motor by Acosta Racing $6000
3mm Apex Seals w/ machining the Rotors $450
Modified Water Jacket $1050
3 Extra Dowel Pins $600
Pettit Racing 20B Subframe $1800
Custom 321 SS Turbo Manifold $1500
Turbonetics T70 Ball Bearing Turbo with 1.15 Hot Side $1940
4" Turbo Downpipe $750
HKS 50mm Wastegate $600
Other misc. Turbo Parts $500
APEX GT Cat-Back Exhaust $560
Custom Fuel Rails with all AN braided lines and BNG Fuel Filter, Aeromotive FPR $1500
Venom 1740 cc/min secondary injectors $600
Venom 850 cc/min primary injectors $600
3 Walbro Intank Fuel Pumps $350
Dual 19 Row Mocal Oil Cooler Kit $1200
Greddy 2 Row FMIC with custom piping $1300
Greddy Elbow $125
Custom Ported 3rd Gen Throttle Body $500
Turbo XS BOV $200
All the Piping Heat Wrapped $250
Polished Intake Manifold and Turbo $350
UR Main Pulley $200
Water Pump and Alternator Pulley $115
Koyo Radiator $360
Brake, Suspension, Driveline
Cross Drilled and Slotted Brake Rotors w/ Hawk HP+ Brake Pads $600
Stainless Steel Brake Lines $100
Buddy Club Racing Spec Suspension $1200
B&M Short Shifter $175
Exterior
VIS Scoot Hood $750
VIS CW Bodykit $750
Carbon Fiber Rear Wing $400
99 Style Combo Lights $200
Labor Estimate for everything above $20000
Value for a bone stock 1993 RX-7 $9500
TOTAL $61375
YOUR PRICE $27000
Super Money Saver!
You are welcome to check all estimated price provided.
|
