|
| 1971 oldsmobile cutlass supreme (a MONSTER) - $1 (fremont / union city) |
| Cars & Trucks, Etc. : Race & Rod |
| 03/15/06 |
I am asking $7000 obo Make an offer if you'd like
I started this project back in 03' but never got around to finishing it.
I have a 71 cutlass supreme with a str8 body, clean, not show quality yet but its not a hooptie.
I have put in a fully rebuilt streetfighter tranny, not driven yet....
I also bought a edelbrock crate engine fully suped up from A.R. racing, they were featured in some hotrod mags for this exact motor. I took my car to a mechanic to see what else i could possibly do and they said there is nothing i can do because it has already been done. Hasn't been cranked yet because i was still waiting for more parts.
i have a link of the motor but CL won't let me post it so if you'd like to see what this beast is all about, gimme a buzz
here's a full description though:
442 hp @ 5800 RPM 468 ft. lbs torque 5100 RPM 383 CHEVY STROKER POWER HOUSE
All new internals proffesionally
Prepared block
Machine work and parts that set our engines apart
valued at: Retail$5,895 (motor alone)
Machine Work
Select Hi Tin block 4 bolt main machined 030-060 - 750.00
align bore and or check for run out.full race clearancing
Mag Check-preasure check ... $40
Hot Tank - Jet Wash .... $50
Bore Torque Plate Hone ... $125 Torque Plate Gives True Finish
Clearance block - -casting flash only n/c..
shotpeen rods... $45
Dynamic balance assembly.. $125
File fit rings - blue print clearance... $90
press - pistons to rods... $45
Install cam bearings - freeze plugs... $45
Port blue print cylinder heads... $200
Final assemble full rotating and top end
Parts including final torque - clearance - and geometry of all parts... $200 total labor you could spend 1700.00
All new Performance Internal Parts
SI K B hyperutectic pistons 10.3 to 1 piston set[ 289.00 PUMP GAS OK 91 OCTANE
EAGLE STEEL crank with superior wear sized and indexed.399.00
Childs & Albert - zz gapdura Moly File Fit Rings... $159.99 [provides the ultimate in ring sealing making more power!!
Durabond - cam bearings... 49.99
gm pink forged steel rods 199.00
ARP - wavelock - rod bolts... $59.99
Clevite- -bearings tri metal 77 - rod and main... $99.99
custom hi output cam lifter set .. 189.00
Cloyes - true roller set... $59.99
Comp - cams cam locks... $4.99
comp cams xe chrome moly pushrods 99.99
Dyna gear race - oil pump... $49.99
Dyna gear - pickup... $29.99
ARP - steel drive... $13.99
After market - oil pan. baffeld 5 qt $59.99
After market - timing cover... $19.99
pioneer/arp - head bolts... $59.99
ARP/ - rocker studs 3/8... 39.99
Fel Pro blue - gasket sets... 89.99 - TOTAL PARTS YOU COULD SPEND BUILDING YOURSELF 3400.00 INC HEADS COST BELOW
Power Making Featured Parts
ALL NEW EDITION EDELBROCK HEADS WITH REVISED COMBUSTION CHAMBERS CNC PORTS POWER MAKING FEATURES!!. Bowls blended,full ... $1058
Features - - -severe duty 2.02/1.60 valves plus ... 1.45 springs 7 degree super locks comp cam parts..good porting..3/8studs guide plates.gasket match p.c seals.chrome moly retainers[with mild port work these heads are better than ANY OUT BOX HEADS YOU COULD PUT ON FROM SAME MANUFACTURE
hi perfromance roller rockers-1.6 ratio... $249.99
s custom series- -muscle car cam pp show polished rpm intake 1800.to 5800 rpm range dual plane..179.00
Features - 110 center line 488 - 490 lift corrected 1.6 ratio = 520/522 lift. 226/228 dur @ 050 awesome power range 2000 stall. lopey muscle car idle. 100% streetable and will run vacum access
Total parts and labor value = $5895 average retail cost
You could spend more by building on your own!
primary use hi performance pump gas street
A really great project car that is not that far from finished.
I will send pics on request. It is pewter metallic (champagne gold)
brakes are pretty new, have MSD ignition not installed yet, also a brand new harmonic balancer in the box jus in case. I bought it and couldn't return because i waited too long.
Also has a nice kenwood flip and detachable face.... 4 nice 6x9's in the back and 2 8" on the doors.
If i failed to mention anything please feel free to ask me questions
|
|
